Wire forms to Customer specifications using up to 13mm wire and 2.0mm flat spring steel. Material used includes stainless steel, phosphor bronze, beryllium copper, music wire, oil tempered, pre-plated music wire and galvanised wire. We can also paint, powder coat, electroplate, electropolish, weld sub-assemble and package to customer requirements.

Ordered to load requirements when the following detail is requested:
  • Maximum compression
  • Maximum solid length
  • Free Length (F/L)
  • Load in lbf, N or Kgf at loaded length (L/L)
  • Rate lbf load per inc (kgf) load per mm.
  • Diameter, maximum outside (O/D), minimum inside (I/D) or mean diameter (M/D)
  • Right hand or left hand wound, if essential
  • Type of ends (see right hand column)
  • Material and finish
  • Tolerances and special working conditions
  • Parallel, Barrel or Conical shaped springs
Ordered to dimensional requirements when the following detail is requested:
  • Free Length (F/L)
  • Diameter, maximum outside (O/D), minimum inside (I/D)
  • Wire size (d) and section.
  • Number of coils, working or total or pitch
  • Right hand or left hand wound, if essential
  • Type of ends
  • Material and finish
  • Tolerances and special working conditions
Materials :
  • Carbon Steel
  • Stainless Steel
  • Phosphor Bronze
  • Brass
  • Beryllium Copper
  • Oil Tempered Steel
  • Other materials to special order
  • Wire Diameter Range
 
Automatic Coiling:
  • 0.25mm - 3.00mm
Hand Coiling:
  • 3.00mm - 5.00mm
Dimensions:
  • Wire diameter 0,2 – 16 mm
  • Outer diameter from 1,2 – 200 mm
home   |  profile   |   products   |   clients   |   enquiry   |   contact us   |   sitemap
 
All Rights Reserved ®. M.G.Metallics (P) Limited. Anantapur. (A.P). INDIA :: Powered by Sysfore
 
Untitled Document